עמוד ראשי  |  התחבר או אם אינך עדיין רשום, הרשם בחינם.
  בלוגר  
אודות
קבלת עדכונים
רוצים לקבל הודעה במייל בכל פעם שהבלוג שלי מתעדכן ?

עדכוני RSS
חיפוש
נושאים
ארכיון
HOW TO EFFECTIVELY INSTALL OPENING DETECTORS I
02/04/2018 05:19
remotecontrol
rf wireless, remote control

Numerous alarm devices and security systems can now be used to protect against burglaries. Opening sensors are one of them. For these to be effective, it is necessary to understand how they work and to install them correctly.


The concept of opening detectors

In a very simple way, the opening sensors are used to maintain contact. They are also called perimeter or contact detectors. Their role is to monitor all accesses to the house, whether at shutter remote control or garage remote control. An opening detector consists of an electrical contactor, which is divided into two parts. Each of these two elements must be installed next to the other, on each side of the opening to be protected. Thus, when there is a break-in, contact will be broken with their disjunction. This anomaly will set off the alarm immediately. The use of an Internet alarm is also recommended for rapid intervention. When a break-in occurs, an alert message will immediately be sent by SMS to the smart phone of the occupants of the house.

Choose the location of the opening detectors

For the opening sensors to work effectively, it is advisable to place them in the right place. The first opening to be protected is undoubtedly the main entrance door. Nearly 36% of break and enter attempts are made via this passage. The main door is therefore the first exit to be protected with an opening detector. In order to ensure optimum safety, it is important not to neglect other access roads. All exterior doors must be equipped with this best rf remote device. The windows of each room of the house are also to be taken into consideration. Going around the house is a good way to identify and remember the various access points, even the less accessible ones. For example, the roof vasistas will be better protected with an opening detector. In the case of a garage communicating with the house, the installation of sensors is also to be preferred at the door.

Install an opening detector

After choosing the location of the opening detectors, it is necessary to install them properly. Referring to its role of maintaining contact, the installation is quite simple. In the case of a door or a window, one of the contactors is to be placed on the frame while the other will be placed on the sash. Only a space of a few millimeters should remain between these two components. In the case of double casement windows, the switch must be placed on the casement equipped with the handle. For a better effectiveness of the device, the metal supports are to be avoided. These may cause interference to the signal from the contactors. Once the detector is correctly installed, a small check is necessary to test the correct operation of the opening detector. The Internet alarm will sound when the contact is broken between the two contactors.

 

0 תגובות